Cnc Axis Digitizing

IP65 0.001MM Digital WithMagnetic High Precision CNC Z Axis Zero Pre-setter 3.2m/s


IP65 0.001MM Digital WithMagnetic High Precision CNC Z Axis Zero Pre-setter 3.2m/s
IP65 0.001MM Digital WithMagnetic High Precision CNC Z Axis Zero Pre-setter 3.2m/s
IP65 0.001MM Digital WithMagnetic High Precision CNC Z Axis Zero Pre-setter 3.2m/s
IP65 0.001MM Digital WithMagnetic High Precision CNC Z Axis Zero Pre-setter 3.2m/s
IP65 0.001MM Digital WithMagnetic High Precision CNC Z Axis Zero Pre-setter 3.2m/s
IP65 0.001MM Digital WithMagnetic High Precision CNC Z Axis Zero Pre-setter 3.2m/s
IP65 0.001MM Digital WithMagnetic High Precision CNC Z Axis Zero Pre-setter 3.2m/s
IP65 0.001MM Digital WithMagnetic High Precision CNC Z Axis Zero Pre-setter 3.2m/s
IP65 0.001MM Digital WithMagnetic High Precision CNC Z Axis Zero Pre-setter 3.2m/s
IP65 0.001MM Digital WithMagnetic High Precision CNC Z Axis Zero Pre-setter 3.2m/s
IP65 0.001MM Digital WithMagnetic High Precision CNC Z Axis Zero Pre-setter 3.2m/s
IP65 0.001MM Digital WithMagnetic High Precision CNC Z Axis Zero Pre-setter 3.2m/s

IP65 0.001MM Digital WithMagnetic High Precision CNC Z Axis Zero Pre-setter 3.2m/s    IP65 0.001MM Digital WithMagnetic High Precision CNC Z Axis Zero Pre-setter 3.2m/s

IP65 0.001MM Digital W/Magnetic High Precision CNC Z Axis Zero Pre-setter 3.2m/s. IP65 0.001MM Digital With Magnetic High Precision CNC Z Axis Zero Pre-se. Response speed of electric induction measuring system is. Power off: after 5 minutes.

Zero: short press to turn on and off, (long press for 3 seconds after power on to clear: "0" under power off state, you can press the probe to turn on). Press this key briefly to switch between metric and English modes. Zero position calibration: inverted z-axis setter, press down the z-axis setter probe on the marble platform or very flat iron block, make the probe datum plane stick to the flat platform, then long press the zer0 key for about 3 seconds, and the display shows 0.000. At this time, the display backlight will be lit as a prompt. Note: after the display value leaves 0.000, the display backlight will go out.

Place the z-axis setter on the work. Piece surface, move the tool in the z-axis direction of the machine tool, press down the side head to the display screen to display "0", and the backlight lights up. At this time, the distance between the tool tip and the work. Do not disassemble or collide the product in the sun. Feedback is very important to us.

It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately.

If it's non-workdays, please kindly be patient and wait till Monday. The item "IP65 0.001MM Digital WithMagnetic High Precision CNC Z Axis Zero Pre-setter 3.2m/s" is in sale since Thursday, February 6, 2020. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Inspection & Measurement\Indicators". The seller is "balalastore8" and is located in Rowland Heights, California. This item can be shipped to United States.
  1. MPN: Does Not Apply
  2. Brand: Unbranded
  3. protection level: IP65
  4. Automatic power off: after 5 minutes without any operation
  5. Stroke range: < 3mm
  6. Resolution: 0.001mm/0.00005 "
  7. Accuracy: 0.005mm
  8. Working temperature: 0-40 °C

IP65 0.001MM Digital WithMagnetic High Precision CNC Z Axis Zero Pre-setter 3.2m/s    IP65 0.001MM Digital WithMagnetic High Precision CNC Z Axis Zero Pre-setter 3.2m/s