Setting base surface and the work table or plane are completely fitted. Press the ON/OFF/ZERO key to set the zero position. After the zero position is set, set the tool setting tool on the table or workpiece plane directly below the machine tool tip. Move the tool tip slowly down, touch the surface of the tool axis, and continue to slowly adjust downward until the LCD The degree on the display is 0.00mm. At this time, the distance from the tip to the table or the plane of the workpiece is 50 mm + / 0.001 mm.Zero the Z axis on the device at this time. Then move the Z axis of the device to a safe distance, take the tool to the tool, and then move the Z axis down to the previously set zero position. At this time, the tool tip reaches the workbench. Or the distance of the workpiece plane is 50 +/- 0.001 mm. According to the actual needs. Adjust the distance from the tool tip to the work surface or the workpiece plane to complete the tool setting.
1 x Z Axis Tool Dial Zero Pre-Setter. The item "IP65 0.001MM Digital Magnetic High Precision CNC Z Axis Zero Pre-setter New" is in sale since Thursday, July 23, 2020. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Inspection & Measurement\Indicators". The seller is "osag7667" and is located in China. This item can be shipped worldwide.