Cnc Axis Digitizing

Digital Hybrid Microstepping Driver EMA2-040D15 For DIY 3 Axis Router CNC Kit


Digital Hybrid Microstepping Driver EMA2-040D15 For DIY 3 Axis Router CNC Kit

Digital Hybrid Microstepping Driver EMA2-040D15 For DIY 3 Axis Router CNC Kit   Digital Hybrid Microstepping Driver EMA2-040D15 For DIY 3 Axis Router CNC Kit

Digital Hybrid Microstepping Driver EMA2-040D15 For DIY 3 Axis Router CNC Kit. 15 Axis Breakout Board + 3EMA2-040D15 Microstep Motor Drivers. We have been fulfilling CNC Motion Control needs for over 10 years to support any project you may have.

Stepper motors and drivers from ENGMATE. Are with high quality for stable and durable usage. The upgraded 5 axis breakout board is specially designed for the CNC single axis 2-phase stepper driver controller.

The breakout board using high-performance three-state bus driver 74HC244 and Schmitt inverter 74HC14. The input signal is amplified, rectified, filtered to make the drive capability of the output signal more stable and stronger.

With this 5 axis breakout board, any 1-5 Microstepper driver controllers can be directly controlled by the PC via the MACH3, KCAM4, etc. Please note: This board uses parallel port to communicate with computer, the USB is used for providing power for the board. The stepper driver board controller in kit is a high performance microstepping driver adopting of bipolar constant-current chopper technology. With this technology and the self-adjustment technology (self-adjust current control parameters) for different motors, the drive motors can run with less noise, lower heating, smoother movement and have better performances at higher speed than most of the drivers in the market.

This kit is suitable for driving 2-phase and 4-phase Nema 8, Nema 11, Nema 14, Nema 16, Nema 17 hybrid stepping motors with a 0.21-1.5A current. 5-axis stepper motor driver controllers. USB power supply and peripherals powered phase are separated to protect computer security. All the signals are opto-isolated. Which can protect your computer security. To define the Limit, Emergence-Stop, Cutter alignment etc. Wide input voltage range: 12-24V, and with anti-reverse function. One relay output control interface. Accessed by the spindle motor or the air pump, water pump, etc. Microstep drivers in the market.

For inverter to control the spindle speed. Shape Pulse and direction signals. Data transfer speeds of up to 10MBit/S.

Amplification, filtering, enhancement processing drivers enable signal. Stepper driver board controller is a high performance Microstep Motor Driver adopting of. With this technology and the self-adjustment technology (self-adjust current control parameters) for different motors, the drive motors can run with less noise, lower heating, smoother movement and provide big torque at higher speed than most of the drivers in the market. It is suitable for driving 2-phase and 4-phase hybrid stepping motors, so Nema 8, Nema 11, Nema 14, Nema 16, Nema 17 stepper motor with a 0.21-1.5A current will be suitable. With 7 stalls output current setting. Adoption of bipolar constant-current chopper technology. Low-noise, low-vibration and low temperature rising. With 7 stalls microstep subdivision setting. Automatic Half Current, motor wires miconnected protection. Internal optical isolation, pulse input frequency up to. Suitable for 2-phase and 4-phase Hybrid stepper motors. Electrical Properties of 5Axis Breakout Board(ambient temperature Tj = 25°C). Get power from PC via USB port and 12-24V power supply for limit/Estop switch. Pulse and Direction Signal Control(EMA2-040D15/EMA2-040D22). Natural Cooling or Fan Forced cooling. Avoid dust, oil fog, corrosive gas. Nema 8, Nema 11, Nema 14, Nema 16, Nema 17. Usually, we dispatch your order within. However, 95%+ parcels are delivered within the reference time.

Please do contact and confirm with us BEFORE placing order. Australia, New Zealand, South Asia, East Asia. UK, France, Germany and Other EU Countries. South America, Italy, Other Countries/Regions.

We sell items to most countries of the world. If you receive a not-as-described e. We will arrange a replacement as soon as the case is confirmed. All qualified return/replacement must be guided by us. We may not accept your return without communication in advance. By placing an order, you acknowledge that you have accepted the terms and conditions of sale. The item "Digital Hybrid Microstepping Driver EMA2-040D15 For DIY 3 Axis Router CNC Kit" is in sale since Tuesday, September 24, 2019. This item is in the category "Business & Industrial\Industrial Automation & Motion Controls\Drives & Starters\Drives & Motor Controls\Stepper Controls & Drives". The seller is "savebase" and is located in HK. This item can be shipped worldwide.
  1. Brand: Generic
  2. MPN: 10102890111100600

Digital Hybrid Microstepping Driver EMA2-040D15 For DIY 3 Axis Router CNC Kit   Digital Hybrid Microstepping Driver EMA2-040D15 For DIY 3 Axis Router CNC Kit