Axis Digital Readout&TTL Linear Scale. Application: lathe, grinding machine, milling machine, boring machine and EMD TOmake the position detection.
The sliding part adopts the five-bearing system which has been proved to be the most reliable and durable. The main grating adopts 90-degree assembly, which is more accurate and accurate. The repeatability of the measurement is more stable.
The signal line adopts multi-layer isolation steel and metal soft shell protection, waterproof and anti-interference fine. Ruler body with aluminum die-casting, hard chrome plating, corrosion-resistant. Dust bar with special plastic, corrosion resistance, scratch resistance, friction resistance.
Parts individual, installation, maintenance, easy maintenance, waterproof, dust-proof good, long service life. The sensor uses a glass precision metrology grating as the measurement reference.Multi-function, easy to operate, reliable and durable, so that the necessary processing of mechanical products. Accuracy class: ± 1um /. Measurement standards: engraved glass grating. Operating voltage: 5V ± 5% DC.
Working speed: =1m / S (1um). Acceleration: = 60m / s². Reference Operating Humidity: = 90RH. Grating pitch: 20um (0.020mm).
Grating measurement system: transmission infrared optical measurement system, infrared wavelength 940nm. Anti-vibration: 50Hz-2KHz, = 180m / s ². Impact: 16ms, = 600m / s ². Displacement frictional resistance: = 5N. Protection class: IP53 / IP64.Signal electrical connection: independent adapter cable (2.5M / 3M / 4M / 5M, = 100M, can be connected to install the block). Note: The above parameters are measured in the ideal environment.
There may be some differences in practical application. Physical length is differnt from the travel length 50/100,150,200,250,300,350,400,450,500, 550,600,650,700,750,800,850,900,950,1000mm 5um. Resolution: 5um (0.005mm) 0.0002.Signal: TTL square /wave EIA-442. Grating pitch: 0.02mm (50LP/min). Accuracy: ±0.005 mm or 0.0002 (at 20 deg C).
Reference marks at interval of 50mm. Response Speed: 60m/min or 40ins/sec. Scale length above refers to the real travel of the linear scale.Actual physical length is 141mm longer than travel. One inch equuals to 25.4mm.
1 x Axis Digital Readout. 1 x Set of brackets.
1 x bag of Screw. The item "2/3 Axis Digital Readout Linear Scale DRO Display CNC Milling Lathe Encoder HOT" is in sale since Monday, October 28, 2019. This item is in the category "Business & Industrial\Electrical Equipment & Supplies\Other Electrical Equipment & Supplies".The seller is "nuflower2009" and is located in Shenzhen. This item can be shipped worldwide.