Large screen LCD display, clear and easy to read 2. Mm/in button; in the power-on state, tap this button to convert the metric inch unit 3. ON/OFF/ZERO: Short press this button to start and zero setting; long press for 3 seconds to shut down.
Powered by a CR2032 3V button battery 5. Reading resolution: 0.001mm 8. Accuracy error 0.005mm Instructions: 1. Before using, press the cutter shaft a few times to check whether the slide is smooth.Wipe the bottom of the tool setting tool with the clean and soft cotton cloth and the zero base surface. Wipe the workbench or workpiece that needs to be determined to the distance of the tool tip. Place the tool setting tool upside down on the workbench or flat surface, and press down gently to ensure that the zero setting base surface and the work table or plane are completely fitted. Press the ON/OFF/ZERO key to set the zero position. After the zero position is set, set the tool setting tool on the table or workpiece plane directly below the machine tool tip, move the tool tip slowly down, touch the surface of the tool axis, and continue to slowly adjust downward until the LCD The degree on the display is 0.00mm. At this time, the distance from the tip to the table or the plane of the workpiece is 50 mm + / 0.001 mm. Zero the Z axis on the device at this time, then move the Z axis of the device to a safe distance, take the tool to the tool, and then move the Z axis down to the previously set zero position. At this time, the tool tip reaches the workbench. Or the distance of the workpiece plane is 50 +/- 0.001 mm. According to the actual needs, adjust the distance from the tool tip to the work surface or the workpiece plane to complete the tool setting. The color might be a little different from the actual product due to color display of different monitors. Please allow 1-3 cm error. Z Axis Tool Dial Zero Pre-Setter. For faraway region or countries (Brazil, Mexico, Peru, etc), the transit time may be longer than Overall Transit Time Frame. Please indicate your personal requirement such as colors, packages, value of declaration etc. At message when you pay to us. Cancellation request should be submitted during this period. Or unpaid dispute will be open automatically. We would try our best to solve your problem.
Please note that the return address must be provided by us. We will reject all return of the package without agreement, regardless of whether a return request is filed. All questions will be replied within 24 working hours. The item "0.001MM Digital With Magnetic High Precision CNC Z Axis Zero Pre-setter IP65 GN" is in sale since Friday, March 27, 2020. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Inspection & Measurement\Indicators".
The seller is "zoo-bici" and is located in China. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Australia.